LED Under Cabinet Desk Lighting Kit USB Puck Light, Daylight White 6000K
out of stock
USB under cabinet LED puck lights offer a fast, affordable and convenient solution to illuminating your desktop or workspace
Powered by standard USB 5V/1A port; avoid the hassle of electrical wiring or cost of an electrician
Three integrated neodymium magnets provide for installation without any screws. The powerful magnets forge a strong bond to all ferrous metal surfaces. For installation on non-ferrous surfaces, such as wood or plastic, the kit includes metal disks with peel-and-stick adhesive backing.
In-line controller switch turns the light on and allows you to select between two levels of brightness
Color Temperature: 6000-6500K (Daylight White) * Voltage: USB 5.0-5.5V * Current: 1A * Power: 1W (Soft Mode) / 5W (Bright Mode) * Cord Length: 78in / 198cm
Color Temperature: 6000-6500K (Daylight White)
Voltage/Current: USB 5.0-5.5V/1A
Power: 1W (Soft Mode) / 5W (Bright Mode)
Cord Length: 78in / 198cm
This under cabinet LED puck light kit offers a fast, affordable and convenient solution to illuminating your desktop or workspace. The USB powered light is easily installs without the hassle of electrical wiring or cost of an electrician. Three integrated neodymium magnets allow you to install the light without any screws. The powerful magnets forge a strong bond to all ferrous metal surfaces. For installation on non-ferrous surfaces, such as wood or plastic, the kit includes metal disks with easy to use peel-and-stick adhesive backing.Magnetic puck light can be used on any surface, regardless of build material. In-line controller switch toggles between two levels of brightness.
Specifications:
Color Temperature: 6000-6500K (Daylight White)
Voltage: USB 5.0-5.5V
Current: 1A
Power: 1W (Soft Mode) / 5W (Bright Mode)
Cord Length: 78in / 198cm
1) Clean the surface with rubbing alcohol
2) Hold the light up to the surface and adjust position to determine the desired location. Use a pencil to mark the placement of the feet relative to that location
3) Place a metal disk on each of the three feet and remove the adhesive backing from the disks
4) Return the puck light to the surface, align the feet with the pencil markings, and press it firmly against the surface to stick the light in place
This under cabinet LED puck light kit offers a fast, affordable and convenient solution to illuminating your desktop or workspace
USB powered light is easily installed without the hassle of electrical wiring or cost of an electrician
Three integrated neodymium magnets allow you to install the light without any screws. The powerful magnets forge a strong bond to all ferrous metal surfaces. For installation on non-ferrous surfaces, such as wood or plastic, the kit includes metal disks with easy to use peel-and-stick adhesive backing.
Magnetic puck light can be used on any surface, regardless of build material
In-line controller switch toggles between two levels of brightness
Installation (non-ferrous surfaces):
1) Clean the surface with rubbing alcohol
2) Hold the puck light up to the surface, adjust the position until desired location is determined, then use a pencil to mark where each of the three feet are relative to that location
3) Place a metal disk on each of the three feet and remove adhesive backing on the disks
4) Hold puck light up to the surface, align the feet with pencil markings, then press it firmly against the surface to stick it in place
Powered by standard USB 5V/1A port; avoid the hassle of electrical wiring or cost of an electrician
Three integrated neodymium magnets provide for installation without any screws. The powerful magnets forge a strong bond to all ferrous metal surfaces. For installation on non-ferrous surfaces, such as wood or plastic, the kit includes metal disks with peel-and-stick adhesive backing.
In-line controller switch turns the light on and allows you to select between two levels of brightness
Color Temperature: 6000-6500K (Daylight White) * Voltage: USB 5.0-5.5V * Current: 1A * Power: 1W (Soft Mode) / 5W (Bright Mode) * Cord Length: 78in / 198cm
Color Temperature: 6000-6500K (Daylight White)
Voltage/Current: USB 5.0-5.5V/1A
Power: 1W (Soft Mode) / 5W (Bright Mode)
Cord Length: 78in / 198cm
This under cabinet LED puck light kit offers a fast, affordable and convenient solution to illuminating your desktop or workspace. The USB powered light is easily installs without the hassle of electrical wiring or cost of an electrician. Three integrated neodymium magnets allow you to install the light without any screws. The powerful magnets forge a strong bond to all ferrous metal surfaces. For installation on non-ferrous surfaces, such as wood or plastic, the kit includes metal disks with easy to use peel-and-stick adhesive backing.Magnetic puck light can be used on any surface, regardless of build material. In-line controller switch toggles between two levels of brightness.
Specifications:
Color Temperature: 6000-6500K (Daylight White)
Voltage: USB 5.0-5.5V
Current: 1A
Power: 1W (Soft Mode) / 5W (Bright Mode)
Cord Length: 78in / 198cm
1) Clean the surface with rubbing alcohol
2) Hold the light up to the surface and adjust position to determine the desired location. Use a pencil to mark the placement of the feet relative to that location
3) Place a metal disk on each of the three feet and remove the adhesive backing from the disks
4) Return the puck light to the surface, align the feet with the pencil markings, and press it firmly against the surface to stick the light in place
This under cabinet LED puck light kit offers a fast, affordable and convenient solution to illuminating your desktop or workspace
USB powered light is easily installed without the hassle of electrical wiring or cost of an electrician
Three integrated neodymium magnets allow you to install the light without any screws. The powerful magnets forge a strong bond to all ferrous metal surfaces. For installation on non-ferrous surfaces, such as wood or plastic, the kit includes metal disks with easy to use peel-and-stick adhesive backing.
Magnetic puck light can be used on any surface, regardless of build material
In-line controller switch toggles between two levels of brightness
Installation (non-ferrous surfaces):
1) Clean the surface with rubbing alcohol
2) Hold the puck light up to the surface, adjust the position until desired location is determined, then use a pencil to mark where each of the three feet are relative to that location
3) Place a metal disk on each of the three feet and remove adhesive backing on the disks
4) Hold puck light up to the surface, align the feet with pencil markings, then press it firmly against the surface to stick it in place